+86 18969314912

Hydraulic Flanged Tube And Four-bolt Split Flange Type

by:Goshen     2020-06-23
Scope--This SAE Standard covers complete general and dimensional specifications for the flanged heads and split flange clamp halves applicable to four-bolt split flange type tube, pipe, and hose connections with appropriate references to the O-ring seals and attaching components utilized with their assembly. (See Figures 1 and 2.) Included as well are recommended port dimensions and port design measures. The flanged heads specified are incorporated into fittings having suitable means for attachment of tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is were going to avoid the use of threaded connections. THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J518 HOSE CONNECTIONS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF The two WORKING PRESSURE RATED Appreciates. Flanged heads shall be as specified in Figure 3 and Table sole. Split flange clamp halves shall be as specified in Figure 4 and Table 1. Port dimensions and spacing shall be as specified in Figure 5 and Table few. O-ring seals, having nominal dimensions as indicated in Table 1, are utilised in conjunction with these connections. They shall conform to the seals laid out in SAE J120, Table on Dimensions and Tolerances. Bolts for use with these connections shall be from the sizes and lengths indicated in Table 1. They would be of SAE Grade 5 material or better as specified in SAE J429. Socket head cap screws of SAE Grade 5 material or better are acceptable. Lock washers, if used, shall be in accordance with the sunshine spring lock washers specified in SAE J489, Dimensions of Light, Medium, Heavy, Extra Heavy, and Hi Collar Spring Lock Washers, and of sizes applicable to your corresponding bolts. The following general specifications supplement the dimensional data contained in Table 1 with respect to all unspecified particulars. This specification covers the pipe material and wall thickness applicable to lap joint flange pipe ends, manufactured with a mechanical forming steps. The lap joint flange connection has been widely used for low-pressure systems the actual world marine, process piping, and similar industries. The values produced in SI units in order to be regarded as the standard. The values given in parentheses are for information only. This Standard covers the complete general, dimensional, mechanical, and gratifaction data for metric prevailing-torque hex nuts and hex flange nuts of property classes 5, 9, and 10 as defined in ASTM A563M. The inclusion of dimensional data in this particular Standard is not intended to signify that all of the nut sizes not to mention the various options described herein are stock items. Consumers should consult with suppliers concerning lists of stock production prevailing-torque hex and hex flange pecans.
Custom message
Chat Online
Chat Online
Chat Online inputting...