Laptop power supplies usually no strain relief upon the port that the AC power outlets installed living in. As a result, the power cord can, previously AC plug connects worn out, and drag it over time. Instead of buying a new power supply for the laptop, you can by placing a new AC plug to rectify.
Clip from the damaged part at the end of the cable an issue pliers.
Remove three inches of the plastic wrap from the end of the damaged power cord.
Take a less than an inch piece of plastic wrap through your end of each one of the three wires after the AC power cord, and then turn together always keep your garden the end of each on the copper wire.
Loosen and dispose of cover from the replacement connector. Pull the cable while using cover of replacement connector.
Solving the screws at the terminals of replacement connector is located. Squeeze white wire, with AC cord gets to the silver port of replacement connector between the Terminal and the bang. Turn the screw press the copper wire to the Terminal until the wire is attached.
Position the black wire, by the AC cord stretches on the gold or brass connection of replacement connector between the Terminal and the screw. Drag the screw and confirmed that the copper wire hold of the Terminal, until the wire is tied up.
Set the Green wire, by the AC cord extends to the green port of replacement connector between the worm and the Final. Pull the screw until the wire is securely fastened and confirm that the wire in firm contact with the Terminal.
Attach the connector cover and repair to fix the screw holes therefore the screws on the plug housing.